160-300 litre water tank blow moulding machine manufacturers
The 230L-300L drums, tool boxes and auto parts series consists of ZQB-250A and ZQB-250B etc., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 12L while volume of products can be 120L. Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
160-300 litre water tank blow moulding machine manufacturers, Setting
Clamping: Double station+Hight-precision guide+large arm cylinder axle
Extrusion system: Hard gear surface reducer+Japan inverter
Die system: Central-incoming extrusion die with special steel
Hydraulic system: Japan hydraulic valve seal and proportional control
Control system: Japan PLC+Imported HMI+PLC automatic.
160-300 litre water tank blow moulding machine manufacturers,equipment information.
| Specification |
| ZQB-250A | ZQB-250B |
| Material |
| PE,PP^ | PE,PP^ |
| Max.container capacity | L | 230 | 300 |
| Number of die | set | 1 | 1 |
| Output | pcs/hr | 260 | 260 |
| Machine Dimension | m | 7.6×3.0×5.2 | 7.8×3.2×5.5 |
| Total weight | ton | 36 | 40 |
| Accumulator head |
| ZQB-250A | ZQB-250B |
| Accumulator capacity | L | 22 | 22 |
| Power of die heating | KW | 46 | 46 |
| Number of heating zone | zone | 5 | 5 |
| Die diameter | mm | 600 | 600 |
| Injection pressure | Mpa | 8 | 8 |
| Max.injection speed | Kg/sec | 2 | 2 |
| Clamping Unit |
| ZQB-250A | ZQB-250B |
| Clamping force | KN | 760 | 880 |
| Platen opening stroke | mm | 700-1800 | 700-1850 |
| Platen size | mm | 1300×1620 | 1360×1900 |
| Max mould size | mm | 1200×1700 | 1260×1980 |
| Mould thickness | mm | 250 | 250 |
| Extruder Unit |
| ZQB-250A | ZQB-250B |
| Screw diameter | mm | 120 | 120 |
| Screw L/D ratio | L/D | 30:1-32:1 | 30:1-32:1 |
| Extruding Volume | Kg/hr | 300 | 300-400 |
| Screw rotation rate | r/min | 6-56 | 10-86 |
| Extruder heating power | KW | 36 | 36 |
| Extruder driving power | KW | 132 | 90-132 |
| Power consumption |
| ZQB-250A | ZQB-250B |
| Driving power | KW | 202 | 180-202 |
| Heating power | KW | 98 | 98 |
Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
