5 gallon blow moulding machine (PC 5 Gallon)
Specially for 3 gallon and 5 gallon water barrel and lamp cover with PC Material.
5 gallon blow moulding machine (PC 5 Gallon), Setting:
Clamping: Double station+Hight-precision guide+large arm cylinder axle
Extrusion system: Hard gear surface reducer+Japan inverter
Die system: Central-incoming extrusion die with special steel
Hydraulic system: Japan hydraulic valve seal and proportional control
Control system: Japan PLC+Imported HMI+PLC automatic.
5 gallon blow moulding machine (PC 5 Gallon),equipment information.
| Specification |
| ZQB-82PC |
| Material |
| PC |
| Max.container capacity | L | 25 |
| Number of die | set | 1 |
| Output | pcs/hr | 500 |
| Machine Dimension | m | 6.5×2.4×4.7 |
| Total weight | ton | 12 |
| Accumulator head |
| ZQB-82PC |
| Number of die heating | zone | 4 |
| Power of die heating | KW | 8 |
| Max die-pin diameter | mm | 150 |
| Accumulator capacity | L | 1.8 |
| General dimension | m | 1.2×0.5×0.42 |
| Clamping Unit |
| ZQB-82PC |
| Clamping force | KN | 220 |
| platen opening stroke | mm | 330-780 |
| platen size | mm | 740×630 |
| Max mould size | mm | 550×660 |
| Mould thickness | mm | 350-420 |
| Extruder Unit |
| ZQB-82PC |
| Screw diameter | mm | 82 |
| Screw L/D ratio | L/D | 38:1 |
| Extruding Volume | Kg/hr | 150 |
| Number of heating zone | zone | 8 |
| Extruder heating power | KW | 20 |
| Extruder driving power | KW | 34 |
| Power |
| ZQB-82PC |
| Oil pump drive power | KW | 45 |
| Fan power for screw | KW | 0.9 |
| Total power | KW | 90 |
| Air pressure | Mpa | 1.2 |
| Air consumption | m3/min | 1.0 |
| Average energy consumption | KW | 42 |
Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
