5 Gallons PC Water Barrel / Lamp Cover (PC Container)
Our PC Extrusion Blow Molding Machine Producing--Specially for PC 3 Gallons and 5 Gallons water Barrel and Lamp cover.
Features:
1) For packaging from 10 to 30 liters capacity
2) Electric system: Mitsubishi PLC from Japan and human-machine interface
3) Hydraulic system: YUKEN hydraulic valves and pump from Japan
4) Plasticizing system: Effective, energy-saved screw
5) Extruding system: Invertors and harden surface gear box
6) Clamping unit: Adopting linear slideway with precision up to um grade
7) Parison injecting: Single hydraulic cylinder without non-synchronization
8) Mould changing: Extruding cover can be adjusted up and down, die head can
Be moved by hydraulic, and mould changing is very easy
9) Low consumption: Power is 26.6kW/h at the product speed of 70%
Our equipment.
ZQB-82PC machine are composed by clamping structure, die head, extrusion system, hydraulic system, Frame, bottom blow device, electric system, parison controller and so on. And the take out products device can be chosen by customer.
Specially for 3 gallon and 5 gallon water barrel and lamp cover with PC Material.
| Specification |
| ZQB-82PC |
| Material |
| PC |
| Max.container capacity | L | 25 |
| Number of die | set | 1 |
| Output | pcs/hr | 500 |
| Machine Dimension | m | 6.5×2.4×4.7 |
| Total weight | ton | 12 |
| Accumulator head |
| ZQB-82PC |
| Number of die heating | zone | 4 |
| Power of die heating | KW | 8 |
| Max die-pin diameter | mm | 150 |
| Accumulator capacity | L | 1.8 |
| General dimension | m | 1.2×0.5×0.42 |
| Clamping Unit |
| ZQB-82PC |
| Clamping force | KN | 220 |
| platen opening stroke | mm | 330-780 |
| platen size | mm | 740×630 |
| Max mould size | mm | 550×660 |
| Mould thickness | mm | 350-420 |
| Extruder Unit |
| ZQB-82PC |
| Screw diameter | mm | 82 |
| Screw L/D ratio | L/D | 38:1 |
| Extruding Volume | Kg/hr | 150 |
| Number of heating zone | zone | 8 |
| Extruder heating power | KW | 20 |
| Extruder driving power | KW | 34 |
| Power |
| ZQB-82PC |
| Oil pump drive power | KW | 45 |
| Fan power for screw | KW | 0.9 |
| Total power | KW | 90 |
| Air pressure | Mpa | 1.2 |
| Air consumption | m3/min | 1.0 |
| Average energy consumption | KW | 42 |
Note: The specifications are subject to change without notice for the further improvement.
!Note: Custom production accepted. Any client idea tried.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
