The 30liter drums, tool boxes and auto parts series consists ofJMX80N Blow molding Machines., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 5L while volume of products can be 30L.
Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
Automatic blow molding machine, hydraulic system, automatic control, high efficiency, low power consumption. Standard process
The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
Setting:
Clamping----------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
| Parameters |
| Specifications | unit | JMX80series |
| Material |
| PP,LDPE,HDPE…. |
| Max container capacity | L | 15--40 |
| Number of die | set | 1 |
| Output(dry Cycle) | pc/hr | 260 |
| Machine Dimension(L×W×H) | M | 4.9x3.8x4.3 |
| Total weigh | ton | 11.5 |
| Clamping Unit |
| JMX80series |
| Clamping force | KN | 220 |
| Platen opening stroke | mm | 400--900 |
| Platen size | mm | 1150x900 |
| Max mould size(W×H) | mm | 500x1000 |
| Mould thickness | mm | 420--550 |
| speed of clamping | mm/sec | 260 |
| speed of opening | mm/sec | 260 |
|
|
|
| Power |
| JMX80series |
| Max drive | KW | 67 |
| Total power | KW | 103.5 |
| Fan power for screw | KW | 1.5 |
| Air pressure | Mpa | 0.8-1.0 |
| Air consumption | m³/min | 1.2 |
| Average energy consumption | KW | 32.5 |
|
|
|
| Extruder unit |
| JMX80series |
| Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | Kg/hr | 120 |
| Number of heating zone | zone | 4 |
| Extruder heating power | KW | 16 |
| Extruder driving power | KW | 37 |
| Rotate speed of screw | rev /min | 9-87 |
| Drive Form |
| transducing speed |
| Speed-down Box |
| Alloy steel gear |
| Screw barrel material |
| 38CrMoAlA(High quality steel) |
| Screw bolt head |
| plating horniness alloy steel |
| heater |
| Casting Aluminium heater |
|
|
|
| Die |
| JMX80series |
| M ax accumulator Volume | L | 4.8 |
| Max feeding speed | kg/sec. | 1.5 |
| Number of heating zone | zone | 3~5 |
| Power of die heating | KW | 16.5 |
| Max die-pin diameter | mm | 250 |
| Diehead distance | mm | 450 |
| (MOOG)Thickness reference point | moog | 30 |
| Diehead structure |
| Storing material jar |
| flowing form |
| First by first element |
| mainly forming part material |
| 38CrMoAlA;42CrMo |
|
|
|
| Hydraulic system |
| JMX80series |
| Rated pressure1A | Mpa | 16 |
| Rated flux1A | L/min | 17 |
| Rated pressure2A | Mpa | 8 |
| Rated flux2A | L/min | 116 |
| Hydraulic pump drive power | KW | 30 |
|
|
|
| Upward-Downward of the pedestal |
| JMX80series |
| Upward-downward distance | mm | 390 |
| The speed of Upward-downward | mm/min | 30 |
|
|
|
| Servo system |
| JMX80series |
| Rated pressure | Mpa | 16 |
| Rated flux | L/min | 16 |
| Hydraulic pump drive power | KW | 4 |
|
|
|
| Down blowing device |
| JMX80series |
| fluctuating distance( up and down) | mm | 150 |
| Dilate distance | mm | 150--450 |
| Blowing head upward-downward distance | mm | 100 |
| Blowing head upward-downward distance by manual | mm | 150 |
| Max. distance of splint | mm | 210 |
|
|
|
| Manipulator |
| JMX80series |
| Holding distance | mm | 350 |
| Taking out distance | mm | 1000 |
|
|
|
| Power supply |
| JMX80series |
| Voltage | V | 380/50HZ |
| Voltage wave range | % | ±5 |
Zhangjiagang King Machine Manufactory Co., Ltd. is a group company located in Zhangjiagang city sanxing industrial town, we have more than 15years experiences on beverage machinery and plastic machines.
We devote ourselves to the development, research and production of plastic machine and liquid food and beverage packing and filling industry and automatic blow molding machine in China.
For beverage machine, our Main products including:
The capacity of 5000-- 40000 BPH for hot filling, MID-temp filling, aseptic cold filling lines.
The capacity of 5000-- 40000 BPH for mineral water and purified water producing line.
The capacity of 5000 -- 36000 BPH for carbonated beverage producing line.
The capacity of 300 -- 2000 TBH, for 3 gallon, 5 gallon.
The capacity of 8000 BPH for the volume of 200ml to 500ml in milk packaging.
All kinds of water treatment equipment.
PET perform inject and blowing-stretching machine. Mould plastics machine
Turn-key projects
Flat and tube UHT device, and CIP system.
All the products are sold well in every province and city of the whole country and also exported to about thirty countries and areas with strong technical force, advanced equipment, scientific management system and perfect after-sales service.
Welcome to visit our company. Thank you!
