KLB82 blow molding machine for PC gallon:
Main specification:
Machine type: KLB82 Max: Product volume: 20L
Screw diameter: 82mm Plasticizing capacity: 90kg/h
Max. Diameter of head tooling: 130mm Accumulator capacity of die-head: 1.85L
![]()
| Unit | Item | Specification |
| Machine type | KLB82 | Accumulator head |
| Extruding unit | max. container capacity | 20 | L |
| screw diameter | 82 special for PC | mm |
| screw L/D ratio | 30: 1 | L/D |
| screw speed | 10-80 | rev. /min |
| plasticizing capacity | 90 | kg/h |
| number of heating zone | 5 | zone |
| extruder heating power | 25 | kw |
| extruder driving power | 45 | kw |
| Die head | max accumulator capacity | 1.85 | L |
| max injection speed | 1 | kg/sec |
| max head tooling diameter | 130 | mm |
| die head heating zone | 4 | zone |
| die head heating power | 8.7 | kw |
| Clamping unit | platen valid size(w× h) | 800× 800 | mm |
| platen daylight | 250-800 | mm |
| clamping force | 190 | kn |
Bottom blowing unit
(optional) | expansion stroke | 140-350 | mm |
| blow pin auto-lifting stroke | 100 | mm |
| blow pin manual-lifting stroke | 200 | mm |
| Robot arm (optional) | moving stroke | 1000 | mm |
| Machine frame | lifting stroke | 350 | mm |
| lifting speed | 30 | mm/min |
| Hydraulic system | main-pump rated pressure | 12 | mpa |
| main-pump rated volume | 180 | L/min |
| hydraulic driving power | 45 | kw |
| parison control hydraulic servo system | optional | |
| Rated volume | 23 | L/min |
| hydraulic pump power | 4 | kw |
| Pneumatic system | max. pressure | 8 | kg/cm2 |
| operating pressure | 0.6 | mpa |
| air consumption | 0.4 | m 3 /min |
| Water source | water supply pressure | 0.3 | mpa |
| Electricity | Voltage | AC380± 10% | V |
| Frequency | 50 | HZ |
| Phase | 3 phase 4 wire | |
| Installation capacity | total rated power | 83 | kw |
| average consumption | 45 | kw/h |
| total weight | 11 | ton |
| dimension(L× W× H) | 5600× 2700× 4500 | mm |
Klupp is a professional modern manufacturer of automatic blow moulding machines for producing hollow plastic products ranged from 0.1L to 1000L. The annual productivity is more than 300 sets.
Keeping firmly to quality is a tradition of Klupp. So far, Klupp has passed SGS, ISO9001& CE authantication and all command components and parts have gotten through the examination by American UL & CSA.
That high-quality & high-efficient machine structure, strict quality management system and excellent after-sale service makes our machines covering all over the country as well as being sold to over 20 countries and territories, such as America, Brazil, Russia, Egypt, Tunis, Thailand, Singapore, Indonesia, etc, so Klupp has received a high acceptance in the international market and annumous appraisal.
In order to repay the costomers and become the most professional manufacturer of blow moulding machine, Klupp deeply realizes that continuously inovating, ahead of market needing and offering more competitive products and more valuable services is the way how to run a company, just as the enterpise philosophy of Klupp "Technology create the future, Services add value".
