Bottle Blowing Mould
The Mould for PE Extrusion Blow Molding Machine. We make the PE Extrusion moulds in accordance with customers' specific requirements.
Machine Type.
The 2L-16L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of ZQD-2L, ZQD-5L, ZQD-10L and ZQD-16L. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 16L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.
Machine Setting.
Clamping------------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system----------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
Bottle Blowing Mould for PE Blow Molding Machine (Mold-1cav.),equipment information.
Specification | | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L |
Material | | PE\PP^ | PE\PP^ | PE\PP^ | PE\PP^ |
Max.container capacity | L | 2 | 5 | 10 | 16 |
Number of die | set | 1\2\3\4 | 1\2\3\4 | 1\2\3\4 | 1\2\3\4 |
Output | pcs/hr | 950×2 | 750×2 | 700×2 | 600×2 |
Machine Dimension | m | 2.7×2.0×2.5 | 3.4×2.2×2.6 | 3.9×2.3×3 | 4.9×4×3.1 |
Total weight | ton | 4 | 6.5 | 9.5 | 10 |
Accumulator head | | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L |
Number of die heating | zone | 3 | 3 | 3 | 4 |
Power of die heating | KW | 4.2 | 5.8 | 6-7 | 6-7 |
Max die-pin diameter | mm | 60 | 80 | 140 | 140 |
Center distance of twin-die | mm | 130 | 160 | 240 | 260 |
Center distance of tri-die | mm | 85 | 110 | 160 | 180 |
Center distance of four-die | mm | 65 | 85 | 120 | 130 |
Clamping Unit | | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L |
Clamping force | KN | 38 | 70 | 110 | 155 |
platen opening stroke | mm | 135-370 | 145-510 | 230-600 | 230-600 |
platen size | mm | 280×380 | 320×390 | 450×490 | 500×490 |
Max mould size | mm | 300×320 | 350×370 | 520×500 | 600×500 |
Mould thickness | mm | 135-210 | 155-300 | 235-380 | 235-380 |
Extruder Unit | | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L |
Screw diameter | mm | 60 | 70 | 90 | 90 |
Screw L/D ratio | L/D | 24:1 | 24:1 | 25:1 | 25:1 |
Extruding Volume | Kg/hr | 60-80 | 100-120 | 130-160 | 130-160 |
Number of heating zone | zone | 3 | 3 | 4 | 4 |
Extruder heating power | KW | 5-6.6 | 6-8.2 | 8.2-9.3 | 8.2-9.3 |
Extruder driving power | KW | 15-18.5 | 22-37 | 37-45 | 37-45 |
Note: The specifications are subject to change without notice for the further improvement.
!Note: Custom production accepted. Any client idea tried.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.