Cap/Lid/Closure Mould for Hot Runner (64 Cavities)
We can design and produce all kinds of cap moulds according to customers' requirements. After many years' development and innovation, hot runner
Arts and crafts which is the most ideal in the line of the injection, is applied in making cap moulds. It reduces the product cost, raises the product quality, so it can produce automatically.
64-cavity Hot Runner Cap Mould has following strongpoints:
1/ With pneumtic valve gate system.
2/ Optimal cooling design and all the cooling system are Nickel plated.
3/ All the components can be interchangeable.
4/ Mirror hand polidhing for the core and cavity.
5/ Adopted temperature controller. Temperature of the cap is controlled point by point.
6/ The material of corn and cavity are made of # 2316stainless steel. Other parts are made of #P20 steel.
Cap/Lid/Closure Mould for Hot Runner (64 Cavities) apply to plastic injection moulding machine,equipment information.
INJECTION MOLDING MACHINE | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
International size rating | 275/88 | 416/128 | 619/168 |
INJECTION | A | B | C | A | B | C | A | B | C |
Shot volume cm3 | 129 | 163 | 201 | 215 | 263 | 316 | 291 | 349 | 463 |
Shot weight g | 121 | 153 | 189 | 196 | 239 | 287 | 273 | 328 | 435 |
(PS) oz | 4.2 | 5.4 | 6.6 | 6.9 | 8.4 | 10.1 | 9.6 | 11.5 | 15.2 |
Screw diameter mm | 32 | 36 | 40 | 38 | 42 | 46 | 42 | 46 | 53 |
Injection pressure Mpa | 214 | 169 | 137 | 193 | 158 | 132 | 190 | 169 | 120 |
Screw L: Dratio ----- | 23:1 | 20:1 | 18:1 | 22:1 | 20:1 | 18:1 | 23:1 | 20:1 | 18:1 |
Screw stroke mm | 160 | 190 | 200 |
Screw speed (stepless) r/min | 0-215 | 0-220 | 0-234 |
CLAMPING SYSTEM | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
Clamping force KN | 880 | 1280 | 1680 |
Opening stroke mm | 320 | 380 | 430 |
Platen size mm×mm | 550×550 | 620×620 | 700×700 |
Space between tie bars mm×mm | 360×360 | 410×410 | 460×460 |
Max.daylight mm | 680 | 810 | 930 |
Mold thickness (Min-Max) mm | 150-360 | 150-430 | 180-500 |
Hydraulic ejection stroke mm | 100 | 125 | 140 |
Hydraulic ejection force KN | 31 | 42 | 50 |
POWER UNIT | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
Hydraulic system pressure Mpa | 16 | 17.5 | 17.5 |
Pump motor KW | 7.5 | 11 | 15 |
Heating capticy KW | 6.5 | 8.9 | 9.8 |
Number of temp control zones | 3+(nozzle) | 3+(nozzle) | 3+(nozzle) |
GENERAL | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
Dry-cycle time Sec | 1.1 | 1.3 | 1.8 |
Oil tank capacity L | 200 | 220 | 300 |
Machine dimensions(LxWxH) M x M x M | 4.42x1.07x1.72 | 4.86x1.09x1.75 | 5.04x1.17x1.97 |
Machine weight Kg | 3500 | 4000 | 5000 |
Note: The specifications are subject to change without notice for the further improvement.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.