Mould Manufacturers and Factories

Home Mould Products Cultured Stone Mould Making Rubber Silicone

Cultured Stone Mould Making Rubber Silicone

Cultured Stone Mould Making Rubber Silicone
Price: US $ 5.6USD/KG
Trade Terms: FOB,CFR,CIF
Min Order: 200kg
Pay Type: L/C,T/T,Paypal,Western Union
Description of Cultured Stone Mold Making Rubber Silicone

Artificial stone mold making rubber silicone, RTV-2 Silicone (room temperature vulcanization silicone) is a type of silicone rubber made from a two-component system (base plus curative; A+B) available in a hardness range of very soft to medium - usually from 15 Shore A to 40 Shore. RTV Silicones can be cured with either a platinum catalyst or a tin catalyst. Applications include making molds for reproducing.

Applications of Cultured Stone Mold Making Rubber Silicone

Artificial stone mold making rubber silicone, RTV-2 Silicone will reproduce the finest detail and is suitable for a variety of industrial and art related applications including prototypes, furniture, sculpture and architectural elements. RTV-2 Silicone can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins, etc...

Features of Cultured Stone Mold Making Rubber Silicone

Good characteristics of easy-operation
Light viscosity and good flowability
Low shrinkage
Favorable tension
No deformation
Favorable hardness
High temperature resistance, acid and alkali-resistance and ageing resistance

Procedures of mold making by RTV-2 Silicone Rubber

1. Clean and prepare specimen (apply consolidant, sealant, or release agent if necessary).
2. Build retaining wall around specimen.
3. Stir silicone base to loosen any settled material.
4. Decant desired amount of silicone into mixing container.
5. Mix in appropriate amount of catalyst.
6. Apply to specimen.
7. If reinforced mold is desired, gently press in gauze after pouring fist layer.
8. When cured, gently remove mold from specimen.
9. If needed, create rigid backing or jacket over mold with plastic, urethane foam, or plaster. 10. Remove backing material and mold. Store mold inside rigid backing.
Package of RTV-2 molding silicone rubber
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle and 10kg/bottle
Professional factory of RTV-2 Molding Silicone:
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.

Need more information, please feel free to contact Nicole.
Item No.MCSIL-2066
Coloroff-white
Curing agentCA30
Mixing ratio100:2
Hardness28-30 Shore A
Tear Strength27 N/mm
Tensile Strength≥3.8 Mpa
Relative density 1.09-1.15 g/cm3
Shrinkage≤0.3%
Elongation at break420%

Prod Model: MCSIL-2066/2088 silicone rubber
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Item: Mcsil-2066
Color: off-White
Mixing Ratio: 100:2
Hardness: 28-30 Shore a
Tear Strength: 27 N/Mm
Tensile Strength: 3.8 Mpa
Elongation At Break: 420%
Material: Silicone Rubber
Raw Material: Silicone Rubber Raw Material
Appearance: Liquid
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series. We can offer all kinds of silicone rubber for your request! Any interesting, please feel free to contact us. Welcome to join us, We will always at your service.

Send your message to this manufacturer

  • Mingcheng Group Limited

More >

Other Mould Products with This Manufacturers

About Us Mould Products Mould Manufacturers Hot Mould Mould News Mould Trade Shows Site Partners Contact Us Sitemap