EE Conveyor Belt

EE conveyor belt

These are the belts which, due to their versatility and economic price, are most often used. The possible variants, both in terms of the reinforced centres and the quality of the covering rubber mats, means that the belts can be adapted to practically any type of transportation use.
They may be manufactured in two variants:

Molded edge conveyor belt
Rubber is used on the sides of the textile centre protecting the belt from potential chafing against the conveyor belt structure and from aggressive agents which may come into contact with the belt.
Maximum width of manufacture: 2200 mm

Cut edge conveyor belt
The belt is supplied to a maximum width of 2200 mm and then may be cut to the required width either by the user or by us on request from the customer. The cut belt is still fully guaranteed for operational use.

The use of smooth conveyor belts may be restricted depending on the angle of inclination of the conveyor belt (the limit being between 18 and 20 degree). When the angle is greater than this we recommend the use of belts which incorporate some kind of transversal support for the material (ribbed belts, with cleats, etc).

The lengths of the belt rolls are only restricted by their dimensions for transporting and the user's ability to handle the rolls.

Nomenclator names for textile belts

The complete nomenclator of textile belts includes the definition of the belt width in mm, the type of carcass, thickness for cover, and a letter which identifies the type of coating.
For example: 1400 EE500/4--4+2 Y

EE conveyor belt

1)Belt construction
Top Cover: Any thickness from 0 to 1"
Carcass: 1 to 8 plies or more
Bottom Cover: Any thickness from 1/32" to 1" (Bareback also is available)

2)Range of Production
Fabric: EE fabric
EE fabric: EE80\100\125\150\160\200\250\300\315\400
3)Tensile Strength: 100~3000N/mm

Belt Width: 300mm~2200mm
No. Of Ply: 1~8 plies
Overall thickness: 3mm~50mm
Edge: Cut or Mounded Edge
Max. Length: According to you requirement