The JMX90D (max produce 20L) double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of JMX45D, JMX50D, JMX60D, JMX70D, JMX90D. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 10L, and its production capacity is 60 % more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
Setting:
Clamping--Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system--Japan PLC+Imported HMI+PLC automatic
Parameters |
Specifications | unit | JMX901D |
Material |
| PP,LDPE,HDPE…. |
Max container capacity | L | 2X20L |
Number of die | set | 1 |
Output(dry Cycle) | pc/hr | 500X2 |
Actual output | pc/hr | 120pcs/20L |
Machine Dimension(L×W×H) | M | 4.5x2.8x3.5 |
Total weigh | ton | 14.5 |
|
Clamping Unit |
| JMX901D |
Clamping force | KN | 145 |
Platen opening stroke | mm | 300-750 |
Platen size | mm | 500X650 |
Max mould size(W×H) | mm | 550X550 |
Mould thickness | mm | 330-430 |
|
Power |
| JMX901D |
Max drive | KW | 75 |
Total power | KW | 115 |
Fan power for screw | KW | 0.54 |
Air pressure | Mpa | 0.7 |
Air consumption | m³/min | 0.8 |
Average energy consumption | KW | 33.5 |
|
Extruder unit |
| JMX901D |
Screw diameter | mm | 90 |
Screw L/D ratio | L/D | 25 |
Plasticising capacity | Kg/hr | 140 |
Number of heating zone | zone | 5 |
Extruder heating power | KW | 25 |
Extruder driving power | KW | 45 |
Rotate speed of screw | rev / min | 9-87 |
Drive Form |
| transducing speed |
Speed-down Box |
| Alloy steel gear |
Screw barrel material |
| 38CrMoAlA(High quality steel) |
Screw bolt head |
| plating horniness alloy steel |
heater |
| Casting Aluminium heater |
|
Die |
| JMX901D |
Number of heating zone | zone | 4~6 |
Power of die heating | KW | 12.6 |
Max die-pin diameter | mm | 240 |
(MOOG)Thickness reference point | moog | 30 |
Diehead structure |
| Storing material jar |
flowing form |
| First by first element |
mainly forming part material |
| 38CrMoAlA;42CrMo |
|
Hydraulic Pressure |
| JMX901D |
Extruder driving power | Kw | 30 |
rated pressure | Mpa | 14 |
|
Vertical travel |
| JMX901D |
Table vertical stroke | mm | 390 |
Lift speed | mm/min | 30 |
|
Power supply |
| JMX901D |
Voltage | V | 380/50HZ |
Voltage wave range | % | ±5 |
Zhangjiagang King Machine Manufactory Co., Ltd. is a group company located in Zhangjiagang city sanxing industrial town, we have more than 15years experiences on beverage machinery and plastic machines.
We devote ourselves to the development, research and production of plastic machine and liquid food and beverage packing and filling industry and automatic blow molding machine in China.
For beverage machine, our Main products including:
The capacity of 5000-- 40000 BPH for hot filling, MID-temp filling, aseptic cold filling lines.
The capacity of 5000-- 40000 BPH for mineral water and purified water producing line.
The capacity of 5000 -- 36000 BPH for carbonated beverage producing line.
The capacity of 300 -- 2000 TBH, for 3 gallon, 5 gallon.
The capacity of 8000 BPH for the volume of 200ml to 500ml in milk packaging.
All kinds of water treatment equipment.
PET perform inject and blowing-stretching machine. Mould plastics machine
Turn-key projects
Flat and tube UHT device, and CIP system.
All the products are sold well in every province and city of the whole country and also exported to about thirty countries and areas with strong technical force, advanced equipment, scientific management system and perfect after-sales service.
Welcome to visit our company. Thank you!