Mould Manufacturers and Factories

Home Mould Products High Tear Strength RTV Silicone Rubber for Molding

High Tear Strength RTV Silicone Rubber for Molding

High Tear Strength RTV Silicone Rubber for Molding
Price: US $ 5.7USD/KG
Trade Terms: FOB,CFR,CIF
Min Order: 200kg
Pay Type: L/C,T/T,Paypal,Western Union
High Tear Strength RTV silicone rubber for stone products molding
 
High Tear Strength RTV silicone rubber for stone products molding( resin crafts products molding ,plaster crafts products molding, cornice products molding, and ceiling products molding etc)
 
High Tear Strength RTV silicone rubber for Stone products molding In Brushing Way to Make Molds
 
Tear Strength RTV silicone rubber for Stone products molding is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to de-mould. This brushing silicon is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2‰.
 
High Tear Strength RTV silicone rubber for Stone products molding (General Description)
 
Tear Strength Liquid Silicone for Stone products molding and RTV-2 molding silicon rubber are general called two-component room temperature vulcanization silicon rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the brushing silicon is still operational within 30 minutes, and in 2-5 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The brushing silicon is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.
 
High Tear Strength RTV silicone rubber for Stone products molding (Operation Instruction)
 
The RTV silicone rubber for Stone products molding is white or red flowing liquid with general hardness of 23—27A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and de-mould, more curing agent is needed; contrarily, if molds requiring slower drying and de-mould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy de-mould.)
 
Limitations of RTV silicone rubber for Stone products molding:

When the hardness of silicon rubber is lower than 15 shore A, the tension, the tear strength, the ageing resistance, acid and alkali-resistance of silicon rubber will reduce respectively.
When the hardness of silicon rubber is higher than 50 shore A, the tension and the tear strength of silicon rubber will reduce, and the solidified silicon mold will be easily broken.
 
Features of RTV silicone rubber for Stone products molding

1. Good characteristics of easy-operation
2. Light viscosity and good flow ability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance

Item No.
 MCSIL- 2030
Coloroff-white
Curing agentCA30
Mixing ratio100:2
Mixed viscosity24000-25000 cps
Pot life30-40 Minutes
Curing time 4-6  Hours
Hardness28-30 Shore A
Tear Strength30 N/mm
Tensile Strength3.8 MPA
Relative density 1.15 g/cm³
Shrinkage≤0.3%
Elongation at break480%
Methods of moldingPouring

Prod Model: MCSIL-2030 silicone rubber
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Item: Mcsil-2030
Color: off-White
Mixing Ratio: 100:2
Mixed Viscosity: 24000-25000 Cps
Working Time: 30-40 Mins
Curing Time: 4-6 Hours
Hardness: 28-30 Shore a
Tear Strength: 30n/Mm
Tensile Strength: 3.8 MPa
Elongation At Break: 480%
Material: Silicone Rubber
Raw Material: Silicone Rubber Raw Material
Appearance: Liquid
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series. We can offer all kinds of silicone rubber for your request! Any interesting, please feel free to contact us. Welcome to join us, We will always at your service.

Send your message to this manufacturer

  • Mingcheng Group Limited

More >

Other Mould Products with This Manufacturers

About Us Mould Products Mould Manufacturers Hot Mould Mould News Mould Trade Shows Site Partners Contact Us Sitemap