Mould Manufacturers and Factories

Home Mould Products Jar Preform Mould (DAE-P-3)

Jar Preform Mould (DAE-P-3)

Jar Preform Mould (DAE-P-3)
Price: US $ 20000/Piece
Trade Terms: FOB,CFR,CIF
Min Order: 1/Piece
Pay Type: L/C,T/T
1. Needle Valve of No-Cutting PET Preform Molds
2. The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PCO1881, PCO1810, and 30. The cam roller design for the thread splits helps operator maintenance freely.
3. Individual Valve-Gate unit with balanced hot runner system.
4. The PET preform moulds use Dual Tapers design for Lock
5. Maintenance free Roller Cams, make both the opening and closing actions on the thread splits; The bearing has less frication, makes sure the movement of the thread split plate smoothly, and ensures the longer working lift. This roller cam system guarantees the longer service time of the PET prefrom moulds.
6. PET preform mould materials: Mould cavity, core, neck: Germany 2316
Valve pin: SKD51 from Japan
Mould other plate: P20 and 50#
                          THE  MATERIAL  OF  THE  MOLD 
Mould  cavity  Germany  2316  with  HRC  42-45
Mould  core  Germany  2316  with  HRC  45-48
Mould  neck  Germany  2316  with  HRC  45-50
Valve  Pin SKD51  from  Japan  with  HRC  58-60
Valve  Pin  heat  Isolation  pad  America  Dupont  can  withstand  350  degrees  temperature
Hot  runner  nozzle America  Beryllium  copper  with  HRC  37
Mould  manifold  plate H13  from  America  with  HRC  35-38
Mould  other  plate P20
Other  Specification  of  the  Mould
Hot  runner  system    Hot  runner  system  is  made  by  our  own  factory,   But  the  spare  parts  of  the  Hot  runner  is  from  Germany  Hotest
PID  controller Made  by  our  own  factory
Guarantee  for  the  Mould    1  million  shot  times  of  1  year   
Free  spare  parts  of  the  mould  Core  set  :   1set/  cavity:   1  Piece/  hot  runner  system: 1set/PID  controller  system:   1Set/  other  easy  broken  spare  parts  for  each  8cavities  cap  mould.    
The  life  of  the  mould 5-6years  , Even  in  10  years  in  good  maintenance
Installation  &   Commission Our  technician  can  be  the  buyer' s  factory  to  install  and  run  the  mould.   But  the  buyer  should  bear  all  the  cost  for  the  technician' s  trip(include  the  air  ticket,   the  cost  of  the  accommodation  and  the  salary)
Prod Model: DAE-P-3
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Hot Runner: Single Cavity to Multi Cavities
Material: Stainless Steel
Application: Package Industry
Taizhou Huangyan Daelong Mold Co., Ltd ( Taizhou Huangyan Hengyuan Mold & Plastic factory) early from the establishment, is devoted to all kinds of Preform mould, Cap mould and other kinds of plastic mould.

We continually works on development and improvement for holding the management tenets of integrity, Quality first and Credit Tops. By far, We are in possession of one lot advanced equipment and one excellent team. Our Products have already been setup good relationship with many domestic and oversea clients, We serve for customers with advanced technology, good quality, reasonable price and considerate after sale service, Our products are famous and get good reputation in both domestic market and oversea market.

Welcome you to our factory for further negotiation.

Send your message to this manufacturer

  • Taizhou Huangyan Daelong Mold Co., Ltd.

More >

Other Mould Products with This Manufacturers

About Us Mould Products Mould Manufacturers Hot Mould Mould News Mould Trade Shows Site Partners Contact Us Sitemap