SZ-1200 mould cold welding machine, metal surface abrasion welding machine
Brief function:
Repair cracks as this machine with good compact and permeability
Soldering thin stainless steel plate, table-board, tube together.
Main function setup:
Precise pulse welder: Input heat for welding is very small, precision welding. Each tiny defect part can be welded precise and easily
Consecutive pulse welder
Characters of SZ-1200 for welding
1. Small heat affected zone while welding
2. No need preheating processing, no need annealing for the work pieces after welding
3. No deformation and edge after welding.
4. No air hole and sand holes after welding.
5. Precise and accurate: Can weld very small and precise part, the finest wires used for welding can be 0.10mm-0.20mm
6. It is convenient and flexible for welding, site repair is also available.
7. Widely used in repair all cracks, sand holes, collapse edges, corners, abrasion, etc.
8. It is also available welding the toughing mouth of cold dies and tools. Thus exempt from the preheating, heat preservation process of ordinary arc welder.
Application Range
Injection mold, stamping mold, casting mould, rubber mould, copper and aluminum alloy mold, etc. After repairing / welding, all mould can be used for all kinds of mechanical processing, thermal treatment and nitrogen treatment.
Repair work pieces, parts, tools: Like all kinds of gears, rodents, machine tools.
Soldering thin stainless steel plate, such as stainless steel table-board, tube together.
Technical Parameters
Mode
SZ-1200
Input power
Single phase. AC. 220V
Power consumption
1200W
Instantaneous maximum power
> 40KV
Output power
0.05-40KW
Output Currency
2-500A
Pulse frequency range
1-5Hz
Cooling way
Fan automatic air cooling
Applicable tungsten polar diameter
1.0-2.0mm
Net weight
15KG
Dimension (L*W*H)
400*220*290mm
