Mould Manufacturers and Factories

Home Mould Products New LED Grow Lighting 200W 18PCS LEDs/Mould

New LED Grow Lighting 200W 18PCS LEDs/Mould

New LED Grow Lighting 200W 18PCS LEDs/Mould
Price: US $ 119-128/Piece
Trade Terms: EXW
Min Order: 1/Piece
Pay Type: L/C,T/T,Paypal,Money Gram
Znet series -4 Grow LED light indoor hydroponic introduction
After long time of devoted working, we develop our new generation of grow LED light Znet series. With revelutionary heat sink solution, and independent lighting moldule, Znet is very easy to install and the repair. Also, for excellent heat sink instructure, can easy lead out more heat, so the current can go to more than 600mA for single device.

Overall view
Znet-4 includes four units of module, each module is independent, in single module, 20 units of different color device be arranged with standard order. In order to maxium the lighting effectiveness, in one module, lens angle is different to meet color's requirement.
Module assembly
On the PCB broad, two 2.54 standard connection port installed at the edge of all connection is easy to connect no glue

Lens
In order to increase lighting effiency, Znet use second lens to increase the lux Theoritically, the purpose of using different wavelength is to meet the plant's growth requirement as more as possible. Such as voilet is to kill the bartrial; Red is to help flowering itec. Hence, some device need to strength lumen, some device need more coverage, Znet get balance between device function and need of plant.
All angle is same, rarely meet the requirement of different color. According to requirement of different device use different angles.

Device
Znet select top level LED device as light source, which addresses photosynthetic aspects, so that help plant growth finally. Meanwhile, all the device and the wavelength ratio can be cusomized to advance the growth of the plant.

Lumen and LUX
In the range of coverage, Znet Lux changing extent is lighter than D120W grow LED light, , that means plant in the coverage accept almost same energy

Notice
1 Indoor use only, can not in water enviroment, no crash, no punch.

2 Daisy chain is available, international port for plug is at the back of the case

3 Lighting fail, contact Greensun service center, no allow to open the case without authorization.

4 No provide customer service if remove label

5 Lighting fail, if need repair manual, contact Green Sun service center.
Model Number                                 GS-GL-Znet4
Type of Light Source Epistar&Bridgelux
Quantity of LED 72pcs
Color Ratio of Light Source 660:630:450:460:420:730:3000k=
6:4:2:2:1:1:2
Color of Lamp Body Red and White
Max Power 200w
Actual Power 146w
Input Voltage 100~240V AC
Frequency 50/60 HZ
Input Current 520mA
Beam Angle:  120 degrees
Optics Angle 60/90/120 degrees
Lumens Output 5040lm
Working Environment Minus 25~55 degree
Lifespan 50,000hrs
Size of Lamp Body L330*W330*H80mm
Packing Size L430*W400*H128mm
Weight 4.8kg
Gross Weight/PCS 6kg
Prod Model: GS-ZNET4
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Case Color: Red/White
Device: Epistar and Guanghong
Color: Blue, Deep Blue, Red, Deep Red, IR, Voilet
Ratio: 2:2:4:6:1:1:2
Current: 600mA
Wide Voltage: 85~265VAC
Dimension(Inch): 12.9*12.9*2.7
Dimension(Mm): 330*330*70
Lumen: 2180lm
Item: Indoor Hydroponic
Life: 50000h
IP Rating: IP65
Application: Seedling
Emitting Color: Red and Blue
LED Chips: Bridgelux
Housing Material: Glass
Power: 200W
Input Voltage: 85V-265V
Certification: LVD
Shenzhen Green Sun Optoelectric Co., Ltd was founded in 2010, located in Shenzhen city, Guangdong province, PRC.

We focus on LED grow light, LED aquarium light, LED flood light, LED high bay light and LED tube light.

The CE, PSE, GMC certificate of the above products make sure the end user using safely.

With the market-oriented policy, we speed up the R&D and continuous improvement. We strive to provide excellent product and perfect service for our customer.

Quality is our life, providing excellent product and service to meet even excess Customers' requirement is our responsibility.

Send your message to this manufacturer

  • Shenzhen Green Sun Optoelectronic Co., Ltd.

More >

Other Mould Products with This Manufacturers

About Us Mould Products Mould Manufacturers Hot Mould Mould News Mould Trade Shows Site Partners Contact Us Sitemap