PET Bottle Blowing Machine (ZQ-D2000-2)

PET Bottle Blowing Machine
ZQ-D2000-2 full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to four cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.

1). High Automatization
2). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3). High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4). High Speed: 2600BPH(2-cavity) 4000BPH(4-cavity).
5). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6). Low Cost: Low consumption of electricity, air and water.
7). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.

Settings
A). PLC colour display: OMRON(Japan)
B). Pneumatic parts: FESTO(Germany)
C). Controller of preform transfer: Servo motor National(Japan)
D). Other electric parts are all world-famous brand

Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.2 percent.

PET Bottle Blowing Machine,equipment information.

TYPE	ITEM	ZQ-D1500-2	ZQ-D2000-2	ZQ-D1500-3	ZQ-D1500-4
CONTAINER	Number of cavity	2 cavities	2 cavities	3 cavities	4 cavities
	Output	2200-2600 pcs/hr	1700-2400 pcs/hr	2800-3200 pcs/hr	3800-4000 pcs/hr
	Max.container volume	1.5L	2.0L	1.5L	1.5L
	Max.neck diameter	38mm	38mm	38mm	38mm
	Max.container diameter	90mm	105mm	90mm	105mm
	Max.container height	330mm	330mm	330mm	330mm
ELECTRICAL SYSTEM	Number of lamp	32pcs	32pcs	40 pcs	52 pcs
	Max.heating power	48kw	48kw	60kw	63kw
	Installation power	51kw	51kw	63kw	78kw
	Actual power consumption	16kw	16kw	20kw	24kw
AIR SYSTEM	Operatating pressure	7kg/cm2	7kg/cm2	7kg/cm2	7kg/cm2
	Low pressure consuming	1100 Ltr/min	1100 Ltr/min	1400 Ltr/min	2000 Ltr/min
	Blowing pressure	≤40kg/cm2	≤40kg/cm2	≤40kg/cm2	≤40kg/cm2
	High pressure consuming	2000-2500Ltr/min	2000-2500Ltr/min	2000-3000Ltr/min	3000-3500Ltr/min
CHILLER WATER	Operating pressure	5-6 kg/cm2	5-6 kg/cm2	5-6 kg/cm2	5-6 kg/cm2
	Temperatuer	10ºC	10ºC	10ºC	10ºC
	Consuming	5600kcal/hr	5600kcal/hr	7600kcal/hr	7600kcal/hr
	Flow rater	30Ltr/min	30Ltr/min	45Ltr/min	45Ltr/min
MACHINE	Machine dimension	3.0×1.7×2.0 (m)	3.0×1.7×2.0 (m)	3.0×1.7×2.0 (m)	2.1×1.9×2.0 (m)
	Machine weight	2.5ton	2.8ton	3.0ton	3.2ton