We supply pet preform and bottle cap product.
Injection molding systems are available from 88 to 1280 tonnes (880 to 12800 kN) and up to 96 cavities.
Injection systems offer:
1. Faster cycles
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up
This machine can manufacture pet preform and bottle cap product.
PET preform mould and Bottle cap mold apply to Plastic injection molding machine,equipment information.
| INJECTION MOLDING MACHINE | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| International size rating | 275/88 | 416/128 | 619/168 |
| INJECTION | A | B | C | A | B | C | A | B | C |
| Shot volume cm3 | 129 | 163 | 201 | 215 | 263 | 316 | 291 | 349 | 463 |
| Shot weight g | 121 | 153 | 189 | 196 | 239 | 287 | 273 | 328 | 435 |
| (PS) oz | 4.2 | 5.4 | 6.6 | 6.9 | 8.4 | 10.1 | 9.6 | 11.5 | 15.2 |
| Screw diameter mm | 32 | 36 | 40 | 38 | 42 | 46 | 42 | 46 | 53 |
| Injection pressure Mpa | 214 | 169 | 137 | 193 | 158 | 132 | 190 | 169 | 120 |
| Screw L: Dratio ----- | 23:1 | 20:1 | 18:1 | 22:1 | 20:1 | 18:1 | 23:1 | 20:1 | 18:1 |
| Screw stroke mm | 160 | 190 | 200 |
| Screw speed (stepless) r/min | 0-215 | 0-220 | 0-234 |
| CLAMPING SYSTEM | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| Clamping force KN | 880 | 1280 | 1680 |
| Opening stroke mm | 320 | 380 | 430 |
| Platen size mm×mm | 550×550 | 620×620 | 700×700 |
| Space between tie bars mm×mm | 360×360 | 410×410 | 460×460 |
| Max.daylight mm | 680 | 810 | 930 |
| Mold thickness (Min-Max) mm | 150-360 | 150-430 | 180-500 |
| Hydraulic ejection stroke mm | 100 | 125 | 140 |
| Hydraulic ejection force KN | 31 | 42 | 50 |
| POWER UNIT | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| Hydraulic system pressure Mpa | 16 | 17.5 | 17.5 |
| Pump motor KW | 7.5 | 11 | 15 |
| Heating capticy KW | 6.5 | 8.9 | 9.8 |
| Number of temp control zones | 3+(nozzle) | 3+(nozzle) | 3+(nozzle) |
| GENERAL | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| Dry-cycle time Sec | 1.1 | 1.3 | 1.8 |
| Oil tank capacity L | 200 | 220 | 300 |
| Machine dimensions(LxWxH) M x M x M | 4.42x1.07x1.72 | 4.86x1.09x1.75 | 5.04x1.17x1.97 |
| Machine weight Kg | 3500 | 4000 | 5000 |
Note: The specifications are subject to change without notice for the further improvement.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
