Plastic blow molding machinery
ZQ-A1500-2, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L, 1.5L, 5L. It can blow various bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Plastic blow molding machinery, ZQ-A1500-2
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can't transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: It has saved the cost to the maximum extent; It has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
| TYPE | ITEM | ZQ-A1500 | ZQ-A1500-2 | ZQ-A1500-3 | ZQ-A5000 | ZQ-A5000-2 |
| CONTAINER | Number of cavity | 1 | 2 | 3 | 1 | 2 |
| Output | 1000-1300 pcs/hr | 1700-2100 pcs/hr | 2800-3100 pcs/hr | 500-700 pcs/hr | 1200-1300 pcs/hr |
| Max.container volume | 2.0L | 2.0L | 2.0L | 5L | 5L |
| Max.neck diameter | 38mm | 38mm | 38mm | 100mm | 100mm |
| Max.container diameter | 105mm | 105mm | 105mm | 180mm | 180mm |
| Max.container height | 350mm | 350mm | 350mm | 350mm | 350mm |
| ELECTRICAL SYSTEM | Number of lamp | 28 pcs | 28pcs | 40pcs | 28pcs | 48pcs |
| Max.heating power | 22kw | 42kw | 60kw | 42kw | 60kw |
| Installation power | 25kw | 44kw | 65kw | 44kw | 63kw |
| Actual power consumption | 16kw | 28kw | 40kw | 30kw | 40kw |
| AIR SYSTEM | Operatating pressure | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² |
| Low pressure consuming | 900 Ltr/min | 1200 Ltr/min | 1600 Ltr/min | 1200 Ltr/min | 1600 Ltr/min |
| Blowing pressure | ≤30kg/cm² | ≤30kg/cm² | ≤30kg/cm² | ≤30kg/cm² | ≤30kg/cm² |
| High pressure consuming | 1200-1600Ltr/min | 2000-2500Ltr/min | 2800-3000Ltr/min | 2000-2500Ltr/min | 3000-3500Ltr/min |
| CHILLER WATER | Operating pressure | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² |
| Temperatuer | 10°C | 10°C | 10°C | 10°C | 10°C |
| Consuming | 3600kcal/hr | 5600kcal/hr | 7600kcal/hr | 5600kcal/hr | 5600kcal/hr |
| Flow rater | 20Ltr/min | 30Ltr/min | 40Ltr/min | 30Ltr/min | 30Ltr/min |
| MACHINE | Machine dimension | 2.9×1.7×1.85(m) | 3.1×1.45×1.85(m) | 4.20×1.60×1.9(m) | 3.3×1.75×1.9(m) | 4.35×2.0×1.9(m) |
| Machine weight | 1.6T | 1.8T | 2.3T | 2.0T | 3.0T |
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
