Plastic Blow Moulding Machines for Hot Filling Bottles
ZQ-B1500-2 series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has two to three cavities and the maximum capacity of the products is 2.0L. It is special for hot filling bottles, which is made of plastic of crystalline type, such as PET and PP etc.
High pressure clamping system, with horizontal pressure and vertical locking system, will make sure of strong clamping force to prevent mould opening during heating process
Reduce inpulse force the bottom mould with control of right stretching position
Blow Moulding Technique
A). Preforms are heated by moving along the preheater and self-rotating. Temperature can be adjusted till it is suitable to blow.
B). Preform is tretched vertically and then horizontally, In the hot cavity. Bottle will be shaped by twice blowing treatment to make PET stay at the crystallzing temperature
Settings
A). PLC colour display: OMRON(Japan)
B). Pneumatic parts: FESTO(Germany)
C). Controller of preform transfer: Servo motor DELTA(TAIWAN)
D). Other electric parts are all world-famous brand
Plastic Blow Moulding Machines for Hot Filling Bottles, Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.2 percent.
Plastic Blow Moulding Machines for Hot Filling Bottles,equipment information.
| TYPE | ITEM | ZQ-B1500-2 | ZQ-B1500-3 | ZQ-B1500-4 | ZQ-B1500-6 |
| CONTAINER | Number of cavity | 2 cavities | 3 cavities | 4 cavities | 6 cavities |
| Output | 2400-2600 pcs/hr | 2800-3300 pcs/hr | 3800-4200 pcs/hr | 5500-6000 pcs/hr |
| Max.container volume | 2.0L | 2.0L | 2.0L | 2.0L |
| Max.neck diameter | 38mm | 38mm | 38mm | 38mm |
| Max.container diameter | 105mm | 105mm | 105mm | 105mm |
| Max.container height | 300-330mm | 300-330mm | 300-330mm | 300-330mm |
| ELECTRICAL SYSTEM | Number of lamp | 27pcs | 36pcs | 60pcs | 90pcs |
| Max.heating power | 27kw | 36kw | 60kw | 90kw |
| Installation power | 38kw | 48kw | 65kw | 96kw |
| Actual power consumption | 18kw | 22kw | 40kw | 60-70kw |
| AIR SYSTEM | Operatating pressure | 7-9kg/cm² | 7-9kg/cm² | 7-9kg/cm² | 7-9kg/cm² |
| Low pressure consuming | 1200Ltr/min | 1400Ltr/min | 2000Ltr/min | 3000Ltr/min |
| Blowing pressure | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² |
| High pressure consuming | 2000-2500 Ltr/min | 2000-3000 Ltr/min | 3000-3500 Ltr/min | 4500-5000 Ltr/min |
| CHILLER WATER | Operating pressure | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² |
| Temperatuer | 10ºC | 10ºC | 10ºC | 10ºC |
| Consuming | 5600kcal/hr | 7600kcal/hr | 19000 kcal/hr | 25200 kcal/hr |
| Flow rater | 30Ltr/min | 45Ltr/min | 60Ltr/min | 200Ltr/min |
| MACHINE | Machine dimension | 3.25x1.5x2.1(m) | 4.5x2.1x2.1(m) | 4.7x2.1x2.1(m) | 7.3x2.2x2.1(m) |
| Machine weight | 3.1ton | 3.9ton | 4.1ton | 6.35ton |
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
