Plastic Pet Preform Injection Mould Hot Runner (Shut-Off Nozzle)
Our mould, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.10mm; Weight difference is less than 0.3G; 2-5 moulds per minute; 2 million guarantee; Utmost 144 cavities in one mould.
Main feature:
1. Mold cavity from 1 up to 144.
2. Electric control system with simulating stretch testing improve yield rate.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentricity.
4. The material of mould die core and die cavity are made of Sweden special mould steel.
5. International standard screw neck, imported nitrided steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 2 million guarantee.
Plastic Pet Preform Injection Mould Hot Runner (Shut-Off Nozzle) apply to plastic injection molding machine.
Machine information.
| INJECTION MOLDING MACHINE | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| International size rating | 275/88 | 416/128 | 619/168 |
| INJECTION | A | B | C | A | B | C | A | B | C |
| Shot volume cm3 | 129 | 163 | 201 | 215 | 263 | 316 | 291 | 349 | 463 |
| Shot weight g | 121 | 153 | 189 | 196 | 239 | 287 | 273 | 328 | 435 |
| (PS) oz | 4.2 | 5.4 | 6.6 | 6.9 | 8.4 | 10 | 9.6 | 12 | 15 |
| Screw diameter mm | 32 | 36 | 40 | 38 | 42 | 46 | 42 | 46 | 53 |
| Injection pressure Mpa | 214 | 169 | 137 | 193 | 158 | 132 | 190 | 169 | 120 |
| Screw L: Dratio ----- | 23:1 | 20:1 | 18:1 | 22:1 | 20:1 | 18:1 | 23:1 | 20:1 | 18:1 |
| Screw stroke mm | 160 | 190 | 200 |
| Screw speed (stepless) r/min | 0-215 | 0-220 | 0-234 |
| CLAMPING SYSTEM | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| Clamping force KN | 880 | 1280 | 1680 |
| Opening stroke mm | 320 | 380 | 430 |
| Platen size mm×mm | 550×550 | 620×620 | 700×700 |
| Space between tie bars mm×mm | 360×360 | 410×410 | 460×460 |
| Max.daylight mm | 680 | 810 | 930 |
| Mold thickness (Min-Max) mm | 150-360 | 150-430 | 180-500 |
| Hydraulic ejection stroke mm | 100 | 125 | 140 |
| Hydraulic ejection force KN | 31 | 42 | 50 |
| POWER UNIT | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| Hydraulic system pressure Mpa | 16 | 17.5 | 17.5 |
| Pump motor KW | 7.5 | 11 | 15 |
| Heating capticy KW | 6.5 | 8.9 | 9.8 |
| Number of temp control zones | 3+(nozzle) | 3+(nozzle) | 3+(nozzle) |
| GENERAL | ZQ88-M6 | ZQ128-M6 | ZQ168-M6 |
| Dry-cycle time Sec | 1.1 | 1.3 | 1.8 |
| Oil tank capacity L | 200 | 220 | 300 |
| Machine dimensions(LxWxH) M x M x M | 4.42x1.07x1.72 | 4.86x1.09x1.75 | 5.04x1.17x1.97 |
| Machine weight Kg | 3500 | 4000 | 5000 |
Note: The specifications are subject to change without notice for the further improvement.
Established in 1989, Ziqiang Blow Molding Machine & Mould Co., Ltd. is located in Huangyan China, with total investment of 11 million US dollars and covers 50 thousand square meters. It is an enterprise professionally manufactures and export of pet stretch blow molding machines, PE extrusion blow moulding machines and blowing moulds.
Because good performance-cost ratio and perfect service of our company, this machine is exported in a large amount while selling well domestically, find a good sale in U. S. A., more than 50 countries and regions, such as Australia, Colombia, Peru, Singapore, Philippine, Japan, Hong Kong, Russia, Mexico, Burma, Vietnam, etc., and gain the extensive favorable comment among the customers.
Company for fine service customer, country set up the office in U. S. A., Peru, Russia, Mexico, Burma, etc., carry on the whole follow-up service to the products.
