Virgin Recycled HDPE Granules Film Grade /Injected Grade /Blow Moulding

Basic Info.
Model NO.:High Density Polyethylene 7000F
 
Item:Virgin LDPE/HDPE/LLDPE Granule/Recycled Granules
CAS No.:9002-88-4
 
Place of Origin:China(Mainland)
Model No.:All Kinds of Medel
 
Shape:Granule
Type:Virgin or Recycled
 
Grade:Film, Injection, Extrusion, Pipe, Fiber, Blow
Appearance:White/Transparent/Black
 
Packaging:25kg/ PP Woven Bag or 1000kgs / Woven Bag, 18mts F
Delivery Detail:Within 15days of Order Confirmation
 
Export Markets:Global
Additional Info.
Trademark:FAN
 
Packing:25kg Per PP Woven Bag or as Your Requirement
Standard:CIQ, SGS, ISO
 
Origin:China
HS Code:3901909000
 
Production Capacity:5000ton
Product Description
Virgin LDPE/HDPE/LLDPE granule/recycled granules



Virgin/ Recycled HDPE / HDPE Granules 
1.High quality with best price 
2.Factory directly supply 
3.Prompt shipment
High Density Polyethylene (HDPE)
 
Virgin/ Recycled HDPE / HDPE Granules
 
HDPE properties: 
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. 
 
Application: 
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating 
 
(1)HDPE Specifications:
 

HDPE cable material Property		Typical Value
Mass density  g/cm 3		0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)g/10min		≤1.0
Tensile yield strength  MPa		≥19.0
Flexural modulus  Mpa		≥965
Elongation@ break %		≥400
Impact Embrittlement temperature centidegree		MAX -118
Dielectric Constant	100KHZ	2.32
	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
	1MHZ	MAX 0.0001
Volume resistivity OHM-CM		MIN 1x10 15

Technical specifications(HDPE) 
Film Grade HDPE

Item	Test condition	Test Method	Value	Unit
Density		ISO 1183	0.944-0.955	g/cm3
MFR	190°C/2.16kg	ISO 1133	0.03-0.07	g/10min
Tensile strength at yield		ISO 527-2	22	MPa
Elongation at break		ISO 527-2	>350	%
ESCR	F50,50°C,100%	ASTM D-1693A	1000	h
VICAT		ASTM D-1525	126	°C

 
Blowing molding Grade HDPE

Item	Test Condition	Test Method	Value	Unit
Density		ISO 1183	0.950~0.955	g/cm
MFR	190°C/2.16kg	ISO 1133	1.7~2.5	g/10min
Tensile strength at yield		ISO 527-2	24	MPa
Elongation at break		ISO 527-2	>600	%

 
 (2) Application:
HDPE Injection moulding Grade: the turnover box, house wares, bottle caps, barrel class, hats, food containers, plate, dustbin, packaging, pet bottle base cap, box etc
HDPE Blow molding Grade:Petro cans, containers, hollow molding products, such as various series blow molding barrel, containers,bottles of class, cheng fang cleaner, chemicals, cosmetics,the petrol tank, daily product, etc
HDPE Blow film Grade: Foodstuff packing bag, stretch film tape, blow film, carrier bags, groceries shopping bags, chemical  fertilizer lined with film, etc
HDPE Extruded Grade: Pipe,tube mainly used in gas transportation, public water and chemicals transport, such as building materials, gas pipe, hot water drain pipe etc: sheet material is mainly used in the seat, suitcase, handling  containers.etc.
HDPE Pipe Extrusion Grade: Gas/water pipe, UV Stabilization and pigments during processin. PE100, PE80.
(3)Packing Details:  Packed in 25kg/pp bag, 18-20 tons/20'fcl
(4)Storage:  Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.