Specifications
HDPE film grade
1. Grade: Pipe grade, film grade
2. Free samples provided
3. ISO 9001-2008
HDPE Blow Moulding grade
Properties:
Good insulation performance
Excellent impact resistance(in room temperature even minus 40 degrees)
Melting point: 130° C
Relative density: 0.941-0.960
Good heat resistance and cold resistance
Chemistry stability and mechanical strength are good
High rigidity and toughness, environmental stress cracking resistance is also good.
Good waterproof steam.
Application:
HDPE 7000F pipe grade can be used in the production of pressure pipes. Such as pressurized pipes, fuel gas pipelines and other industrial pipes. It can also be used for making non-pressure pipes such as doublewall corrugated pipes, hollowwall wingding pipes, siliconpipes, siliconcore pipes, agriculture irrigation pipes and Aluminiumplastics coumpound pipes. In addition, through reactive extrusion (silane cross-linking), it can be used for producing crosslinked polyethylene pipes (PEX) for cold and hot water.
|
ITEM |
Unite |
Value |
Test Method |
Melt Mass-Flow Rate
(MFR, 2.16kg) |
g/10 min |
0.07 |
GB/T 3682 |
|
Density |
g/cm3 |
0.955 |
GB/T 1033 |
|
Tensile Strength at Yield |
MPa |
21 |
GB/T 1040 |
|
Elongation at Break |
% |
500 |
GB/T 1040 |
|
Fish-eye(0.8mm) |
n/1520cm3 |
6 |
GB/11116 |
|
Fish-eye(0.34mm) |
n/1520cm3 |
35 |
GB/11116
|
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
